|
Post by Wasim on Dec 13, 2017 6:33:16 GMT -5
Hi mike Hot water is working but not central heating. I replaced fuse and it trips when I press central heating button. I replaced room thermostat and still tripping. When I opened cover both pumps are very hot What do you think issue is please. Thanks Wasim
|
|
andytw
New Member
Owner of 2 Powermax 140 boilers and fixer of programmers
Posts: 24
|
Post by andytw on Dec 14, 2017 18:55:24 GMT -5
Basically when you press the CH button all you are doing is turning on the central heating pump. The store is already hot and full of hot water. Most likely culprit for your problem is therefore the CH pump on the left. I would disconnect it and see if you still have the same problem.
|
|