|
Post by MikeM on Oct 3, 2016 15:56:54 GMT -5
Hi I've been moved into a house for last five months with a Range power max OV 155x CP all working fine until now. Put the heating on for first time other day and worked fine and then day after I've got no hot water or heating.
It is getting power from the mains but the burner is not lit or the lock out light is not on (not sure it's even trying to light?).
There's is no pressure gauge on this as it's fed from water tank in the attic. I've reset the digital display but no luck.
The fan is working in the top section but none of the pumps are turning around for heating or hot water.
Any ideas would be very greatly appreciated.
Mike
|
|
|
Post by Mike_M on Oct 6, 2016 12:38:19 GMT -5
Could it be the pcb?
I believe there are 2 types the blue or green. How would I find out which one is correct? Where is the pcb located to find out?
Hope someone can help.
Cheers Mike
|
|
|
Post by northpole on Oct 10, 2016 3:36:58 GMT -5
Mike_M, from what you describe it's possible the ignition electrode has failed. You really need an engineer to take a look - this isn't something it's safe to replace yourself unless you're gas safety certified.
|
|