|
Post by Jin77 on Mar 25, 2013 4:19:41 GMT -5
Hi, We are having problems with our Potterton Powermax HE. It keeps locking out with the A0.1 code but its quite random. It started off with being once a week, and then in 1 day I had to reset it about 10 times but then it started working again, then had to be set once a day until this weekend it didn't really want to play. Lucky if it stayed on for 30mins.
Any ideas on what could be causing this?
Thanks
|
|
|
Post by Jin77 on Apr 4, 2013 3:07:46 GMT -5
Just to let you know we had 3 engineers come out, the last one had done training on the potterton powermax so was able to clean both probes and its now working (touch wood)..
|
|
|
Post by Mike the Boilerman on Apr 5, 2013 3:56:18 GMT -5
Jin77,
Thanks for returning and giving us the outcome. My apologies for not spotting your question in the first place.
In my experience though, this fault returns when the probes have been cleaned. A new PCB is usually the fix if this happens. And yes, I thoroughly recommend the Powermax course at Baxi!
Mike
|
|
|
Post by Connie on Apr 15, 2013 13:25:57 GMT -5
Hi Jin,
Do you mind me asking how much it cost to get the probes cleaned?
Thank you Connie
|
|
|
Post by Mike the Boilerman on Apr 18, 2013 6:10:45 GMT -5
Connie,
It takes about ten minutes so it depends on who you get to do it, and mainly how far they have to travel to get to you.
Mike
|
|